got pics of carb/hoodscoop cold air setups?

[Port-Holio]

thinking about a new hood with a rip snorting cold air scoop on it. looking for inspiration pics get my azz motivated! thinking about a small cowl hood or SixPak forward facing, and seal it to the aircleaner base.......

[Gear_Head]

thinking about a new hood with a rip snorting cold air scoop on it. looking for inspiration pics get my azz motivated! thinking about a small cowl hood or SixPak forward facing, and seal it to the aircleaner base.......

I need to finish mine this spring, should be unique and a one of a kind..type of deal. I am interested in following this thread.

[IMAGE]

What kinda car we talking about here?

[IMAGE]

http://www.allpar.com/racing/missile/hood-scoops.html

http://www.allpar.com/photos/racing/mopar-missile/hood-scoops/TWIN-SIDE-FUNNEL-SCOOP.jpg

[Gear_Head]

http://www.allpar.com/racing/missile/hood-scoops.html

http://www.allpar.com/photos/racing/mopar-missile/hood-scoops/TWIN-SIDE-FUNNEL-SCOOP.jpg

was their more to that link than pictures? For me, the issue I ran into was havnig enough room to run a Dual cold air kit (if it Rained) along with the Ram Air.

[IMAGE]

There is some different stuff off that link worth looking at.

[Port-Holio]

LOL thanks Image, awesome retro mopar science fair shit! LUV IT, but a looking at going this route on my Abody.

http://www.hotrod.com/howto/113_0310_weight_reduction/photo_01.html

and something like the one right next to the red "Availability" paragraph. It's from the late 60's Camaro's and has a rubber seal around the aircleaner to seal to hood from underneath:

http://www.camaro-untoldsecrets.com/articles/rpo_zl2.htm

[IMAGE]

I was just saying how I liked that style scoop you are looking at.

[IMAGE]

Allstar Performance Aluminum Flat Plenum Air Pan

# ALL26101
http://eastcoastspeed.com/cart/images/ALL26101.jpg

Thats for a cowl hood though.. Not sure if there is a pre done platform for forward facing scoops..

[IMAGE]

Might be able to start with something like this from a AMX..
http://www.1aauto.com/img/ucart/images/partimage/1ABHI00004/main.JPG

Not sure if not starting from scratch is something you are concerned about of course.

[Gear_Head]

Port holio, I will find some pics from when I started my project and show you what my plans are, might help with where you are going.

have you found that rubber seal for sale at a reason price?

[Port-Holio]

YearOne isn't low buck, but they have all the components, and the seal is $40. The extension ring and sealing flange (glues to bottom of hood) are each $40 too.

http://www.yearone.com/serverfiles/fbshopmain2.asp?hid=814AD11790